Abstract
Palladium nanoparticles with two different ligands were used as electrocatalysts at low temperature in a hermetic, one-pot electrochemical cell with either a LiOH or LiOD electrolyte. During initial, low-pressure experiments involving palladium (Pd) nanoparticle electrocatalysts with Epigallocatechin Gallate (EGCG) ligands an abrupt,
significant pressure drop occurred in the cell headspace air from 1.59 to 0.055 bar. This astounding, repeatable, and unexplained result initiated further experimentation.
Synthetic methods for Pd nanoparticle electrocatalysts with EGCG ligands and with polyvinylpyrrolidone (PVP) ligands are described. These Pd nanoparticles are capable
of simultaneously generating ammonium, nitrite, and nitrate ions. Ion chromatography was used for quantification of nitrogen-containing anions and cations in the alkaline
electrolyte. The Pd nanoparticles with PVP ligands and a 5 bar 3:1 H2/N2 gas mixture resulted in a nitrate yield rate of 1.16 µg h−1 mg−1 with current applied for 132 hr. The
Pd nanoparticles with PVP ligands also achieved the highest ammonium and nitrite ion yield rates at 10 bar under similar conditions while the Pd-EGCG nanoparticles
achieved lower yield rates Faradaic efficiencies (FE) values. This study demonstrates that direct generation of nitrite and nitrate salts avoids the need to further process
ammonia into ammonium nitrate.
Supplementary materials
Title
Supporting Information for Nitrogen Fixation via Pd-nanoparticle Electrocatalysis
Description
The supporting information includes descriptions of the analytical methods for the determination of the ammonium cations, the nitrite, and the nitrate anions. It
also describes the three cell types used, the electrical configuration including the DC power supply, the sensors used, the results of the control experiments, of the initial
experiments containing air in the headspace, and experiments conducted with a H2 and N2 (3:1)gas mixture in the headspace.
Actions