Preparation and characterization of a mesoporous silica-based copolymer loaded with bis(2-ethylhexyl) phosphate for the efficient separation of trace radium from natural thorium

27 February 2024, Version 1
This content is a preprint and has not undergone peer review at the time of posting.

Abstract

Targeted α-nuclide therapy (TAT) has attracted significant attention in recent years due to its unique advantages in cancer treatment. As one of the most important TAT nuclides, 212Pb is quite rare and strongly depends on the supply of its parent nuclides with an appropriate half-life, such as 228Ra or 224Ra. Therefore, establishing a stable and effective method to obtain these nuclides is critical. To address this issue, a silica-supported copolymer loaded with bis (2-ethylhexyl) phosphate (HDEHP) was prepared, characterized, and investigated for the separation of 228Ra and 224Ra from natural 232Th in the nitric acid media. The experimental results showed that the adsorbent was prepared successfully with 19.5 wt% HDEHP loading, and possessed a small particle size and a porous structure. Compared with traditional cation exchange resin, the adsorbent exhibited ultrahigh selectivity and ultrafast adsorption kinetics towards thorium, with the equilibrium time less than 3 min. The adsorption isotherm was well described by the Langmuir model, and the maximum adsorption amount towards thorium could reach 72.0 mg/g. Thermodynamic investigations suggested that the thorium adsorption was endothermic and spontaneous. On basis of batch experiments, the separation behaviors were further investigated in column modes, and the separation of 228Ra and 224Ra from thorium was finally demonstrated using 226Ra as the tracer nuclide. The chemical recovery rate to 226Ra reached 96.7%, and the decontamination factor to thorium exceeded 105. The spectroscopic assessment suggested that the adsorbed species was mainly the positive Th4+ cation and almost no barium and nitrate ions were involved. The adsorption mechanism was dominated by compounding with oxygen in P-O-H and P=O groups. This work exhibited an excellent material and an efficient method for separating 228Ra and 224Ra from natural thorium, rendering it particularly significant in the future preparation and application of 212Pb.

Keywords

Thorium
radium
separation
silica-based copolymer
HDEHP

Supplementary materials

Title
Description
Actions
Title
Supplementary Materials
Description
Methods and some experimental results
Actions

Comments

Comments are not moderated before they are posted, but they can be removed by the site moderators if they are found to be in contravention of our Commenting Policy [opens in a new tab] - please read this policy before you post. Comments should be used for scholarly discussion of the content in question. You can find more information about how to use the commenting feature here [opens in a new tab] .
This site is protected by reCAPTCHA and the Google Privacy Policy [opens in a new tab] and Terms of Service [opens in a new tab] apply.