Comparative techno-economic and life-cycle analysis of precious versus non-precious metal electrocatalysts: The case of PEM fuel cell cathodes

04 September 2023, Version 1
This content is a preprint and has not undergone peer review at the time of posting.

Abstract

Sluggish kinetics in the oxygen reduction reaction (ORR) require significant quantities of expensive Pt-based nanoparticles on carbon (Pt/C) at the cathode of proton exchange membrane fuel cells (PEMFCs). This catalyst requirement hinders their large-scale implementation. Single atom Fe in N-doped C (Fe-N-C) electrocatalysts offer the best non-Pt-based ORR activities to date, but their environmental impacts have not been studied and their production costs are rarely quantified. Herein, we report a comparative life-cycle assessment and techno-economic analysis of replacing Pt/C with Fe-N-C at the cathode of an 80 kW PEMFC stack. In the baseline scenario (20 gPt/C vs. 690 gFe-N-C), we estimate that Fe-N-C could reduce damages on ecosystems and human health by 88-90% and 30-44%, respectively, while causing a comparable impact on resource depletion. The environmental impacts of Pt/C predominantly arise from the Pt precursor while those of Fe-N-C are presently dominated by the electricity consumption. The monetized costs of environmental externalities for both Fe-N-C and Pt/C catalysts exceed their respective direct production costs. Based on catalyst performance with learning curve analysis at 500,000 PEMFC stacks per annum, we estimate replacing Pt/C with Fe-N-C would increase PEMFC stack cost from 13.8 to 41.6 USD kW-1. The cost increases despite a reduction in cathode catalyst production cost from 3.41 to 0.79 USD kW-1 (excluding environmental externalities). To be cost-competitive with a Pt-based PEMFC stack delivering 2020 US Department of Energy target of 1,160 mW cm-2 (at 0.657 V), the same stack with an Fe-N-C cathode would need to reach 874 mW cm-2, equivalent to a 200% performance improvement. These findings demonstrate the need for continued Fe-N-C activity development with sustainable synthesis routes in mind to replace Pt-based cathode catalyst in PEMFCs. Based on forecasting scenarios of fuel cell vehicle deployment targets, we find that Pt consumption would be constrained by Pt supply.

Keywords

oxygen reduction
life cycle analysis
technoeconomic analysis
proton exchange membrane fuel cell

Supplementary materials

Title
Description
Actions
Title
Electronic Supplementary Information
Description
Suporting information of methods and results.
Actions

Comments

Comments are not moderated before they are posted, but they can be removed by the site moderators if they are found to be in contravention of our Commenting Policy [opens in a new tab] - please read this policy before you post. Comments should be used for scholarly discussion of the content in question. You can find more information about how to use the commenting feature here [opens in a new tab] .
This site is protected by reCAPTCHA and the Google Privacy Policy [opens in a new tab] and Terms of Service [opens in a new tab] apply.