Synthesis and characterization of low-cost ceramic membranes using red mud from the eastern Amazon as waste from the Bayer process

14 February 2023, Version 1
This content is a preprint and has not undergone peer review at the time of posting.

Abstract

This research presents the development and characterization of ceramic membranes from a mixture of Red Mud and Clay. Characterized as for the Apparent Porosity (AP), Water Absorption (WA), Linear Retraction (LR), Apparent Density (AD), Pore Distribution, Hydraulic Permeability and Rejection to a solute of interest. XRD, SEM / EDS, and Rietveld Technique were used to characterize the raw materials. The composition L35A65 shows the best results, with WA = 29.55 ± 0.2, AP = 44.72 ± 0.62, AD = 1.5 ± 0.01, LR =1.67 ± 0.0, mean diameter of pores equal to 0.418µm and hydraulic permeability, Lp = 721.4 Lh/m2.bar. The rejection for yeasts was 99.9% and for starch was 96.8%.

Keywords

Inorganic Membranes
Microfiltration
Material Characterization
Red Mud

Comments

Comments are not moderated before they are posted, but they can be removed by the site moderators if they are found to be in contravention of our Commenting Policy [opens in a new tab] - please read this policy before you post. Comments should be used for scholarly discussion of the content in question. You can find more information about how to use the commenting feature here [opens in a new tab] .
This site is protected by reCAPTCHA and the Google Privacy Policy [opens in a new tab] and Terms of Service [opens in a new tab] apply.