Co/Ba/La2O3 catalyst for ammonia synthesis under mild reaction conditions

06 December 2021, Version 1
This content is a preprint and has not undergone peer review at the time of posting.

Abstract

Ruthenium catalysts may allow realization of renewable energy–based ammonia synthesis processes using mild reaction conditions (<400 °C, <10 MPa). However, ruthenium is relatively rare and therefore expensive. Here, we report a Co nanoparticle catalyst loaded on a basic Ba/La2O3 support and pre-reduced at 700 °C (Co/Ba/La2O3_700red) that showed higher ammonia synthesis activity at 350 °C and 1.0–3.0 MPa than two benchmark Ru catalysts, Cs+/Ru/MgO and Ru/CeO2. The synthesis rate of the catalyst at 350 °C and 1.0 MPa (19.3 mmol h−1g−1) was 8.0 times that of Co/Ba/La2O3_500red and 6.9 times that of Co/La2O3_700red. The catalyst showed activity at temperatures down to 200 °C. High-temperature reduction induced formation of a BaO-La2O3 nano-fraction around the Co nanoparticles, which increased turnover frequency, inhibited Co nanoparticle sintering, and suppressed ammonia poisoning. These strategies may also be appliable to nickel catalysts.

Keywords

renewable energy
hydrogen carrier
ammonia fuel
heterogeneous catalysis
Co catalyst

Comments

Comments are not moderated before they are posted, but they can be removed by the site moderators if they are found to be in contravention of our Commenting Policy [opens in a new tab] - please read this policy before you post. Comments should be used for scholarly discussion of the content in question. You can find more information about how to use the commenting feature here [opens in a new tab] .
This site is protected by reCAPTCHA and the Google Privacy Policy [opens in a new tab] and Terms of Service [opens in a new tab] apply.